[guy rick]

Put a kit in my Gen 2 17. Seems to be not going cycling . Drop the slide and it either fires or shows a firing mark off centered on the brass Doesnt cycle Does not eject. Have tried a 10,11,13,15 recoil spring and it still doesnt cycle if it fires the first round. Would a different striker spring be the fix? Or is there some thing else I need to check or replace. I can put the 9mm back and it fires and cycles.

i have had every exact problem you have described.i have polished the chamber and feed ramp on the barrel real good.tried different stiker pins and springs.had some luck with 11lb recoil spring.even installed ss channel liner and ss firing pin sleeve.tried different mags.end up with the same results.extraction issues feed problems and light stikes.you would think armscor would step up and at least do something after all these people bought into there shit idea that doesn't work with there no quality junk ammo i waisted money on 600 rounds.