Glock Pro Forums banner
1 - 17 of 17 Posts

·
Registered
Joined
·
302 Posts
Discussion Starter · #1 ·
Well today at the gunshow I was able to pick up a ANIB G26 for $400 OTD..
It also came with two Scherer magazine extensions & a Butt Plug..
I removed one of the extensions & put the factory plate back on..
I also installed a smooth faced G17 Trigger Bar Assembly & a 3.5 Scherer Connector that I had in my stash..
The G26 has a better trigger pull than my 17L, This is telling me I need new springs & liner & cups for the 17L..
Well anyhow I finally got me a G26 Produced in July 1999 & still minty & never fired just carried around by the previous owner.. Note the early Tupperware Case that's made for 3rd gen guns with finger grooves..

Glock 26

Glock 17L Meets Glock 26 For The First Time
 

·
Premium Member
Joined
·
2,780 Posts
Congrats
 

·
Registered
Joined
·
302 Posts
Discussion Starter · #8 ·
Thanks Guys!!
This may become my #1 carry Piece, Don't Tell My S&W 940 but I think He knows..
Why else would I take pictures of Him sitting on top of that little flat plastic auto..
I still think the J Frame will carry a bit better for deep concealment & being it's also a 9mm para they will become friends..
Glock 26



Smooth Faced G17 Trigger in Glock 26



Glock 17L & Glock 26

 

·
Super Moderator
Joined
·
7,027 Posts
Congratulations, HeadKnocker!

Now you have the longest and the shortest 9mm Glocks... pretty cool...
 

·
Registered
Joined
·
302 Posts
Discussion Starter · #14 ·
They weigh almost exactly the same unloaded..
The Glock holds 11 & the J Frame 5 in a moon clip..
So loaded the G26 weighs 5-6 rounds heavier, Not much..

I used to have two 940 & a 547 Smith & Wesson, All are 9mm Revolvers
Here's a picture of the three 9mm Smiths, Sold the top two & kept the bottom one..

S&W M547 & pair of 940s 9mm para revolvers
 

·
Premium Member
Joined
·
5,921 Posts
I like the 19c. I don't really notice a huge difference in felt recoil between it and my 3rd Gen G19. I didn't feel much difference between my 4th Gen G19 either, when I traded it for a 3rd Gen. I enjoy shooting it and bought it to use as a warm-up round in GSSF matches. I shoot the G19c in a division I have no chance of wining in and then follow-up with my standard G19 in Amateur Civilian.

I noticed there it builds up carbon deposits between the two ports on the top of the barrel and on the inside of the slide where those two ports meet. Other than that, I wouldn't say it gets any dirtier than my standard Gen 3 G19.
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top