Glock Pro Forums banner
slide
1-13 of 13 Results
  1. Parts
    Used Glock 21, .45ACP complete with barrel and recoil spring, has the LCI extractor, OEM Glock sights. I know it will fit gen 2 & 3 receivers and could fit the G30 with an extended G30 barrel (lug issue). Does fit the G4 receivers but I would be hesitant to run it that way. Will ship priority...
  2. Glock Pistols
    We've all been trained that we should let the slide slam home when chambering a round - specifically don't "walk" it forward. Regardless if using the slide stop lever or slingshot method to release the slide, it's important to let it rip. From my own experience and working with new shooters, I...
  3. Glock Tech / Warranty
    I wanted to see if anyone else had a Glock 20SF and whether they ran into these issues below. I was able to find one forum from back in 2011 that someone started that mentioned them. When I picked up the 20SF, I looked under the slide and noticed there was 'wear' or a slight scratch to the...
  4. Glock Tech / Warranty
    As promised, I'm back with a follow-up to my post on the Gen G34 project. I'll try to be brief. The Lone Wolf Slide and Barrel ("blind marked" and "black oxide") were ordered online on June 24th, and both parts arrived today, September 19th. That's about eleven weeks, for those of you...
  5. Glock Pistols
    So I'm a sig man myself switching over to the Dark side, I've been looking at a few different glocks was looking at the model 17 long Frame I'm not using this Fire to concealing carry or for home defense this is a range gun and I like the longer slide on the Glock 17 L,.. Does anyone know if...
  6. Non-Glock Firearms
    September 30, 1965, San Antonio, Texas: Nearing the completion of Basic Military Training in the Air Force, my flight (USAF equivalent of a platoon, more or less) was ordered to the firing range at Lackland AFB for qualification with the M1 Carbine. Up to this point, my experience with rifles...
  7. Glock Tech / Warranty
    Presented here is a list of the most common modifications or "mods" made to Glock pistols. Most of the mods can be made to either Gen4 or earlier models, so the photos will show some of each. The boundaries we have set around this list of mods are: · Reversible: none of these mods is...
  8. Non-Glock Firearms
    Like I said in the title I just bought a Ruger SR1911 to be the big brother to my G17. It's the Full size and I can't wait to actually have it in hand and to get it to the range. I am not a fan, usually, of stainless steel pistols but everytime I would look into picking up a 1911 I would always...
  9. Glock Tech / Warranty
    I've run about 200 rounds though my Glock 23. I'd cleaned it twice with no problems. Last time I cleaned it I couldn't get the slide to release so I smacked it a couple times with the heal of my hand and it slid off. When putting the slide back on I notice definite binding as the slide grips...
  10. Glock Pistols
    Hello, just bought a new Glock 19 (3rd Gen, US made) I notice that the slide has something like a scratch, at the store the guy said its nothing and its fine, donno... I post a picture of this thing, maybe you could tell me what is this.... When you touching it you wouldn't 'feel' anything...
  11. Glock Tech / Warranty
    I have a 19 Gen4. When I assemble the gun after cleaning, I have to manually move the trigger to the forward position before the slide will move all the way into place on the frame. is this normal for a Gen 4? On Gen 1 and 3 pistols that I've seen, I didn't have to do this. Anyone have the same...
  12. Glock Pistols
    So I've been thinking about customizing the "look" of my G34. This is 100% a competition firearm for me. I will never carry this firearm for personal protection, nor use it in that roll at home. I also will not sell this firearm so I am not worried about it losing, or gaining value based on what...
  13. Glock Pistols
    I'm finally taking the plunge and am going to work on detail stripping. I only disassembled the slide, and I was surprised how much of a breeze it was to take all the components off. I wanted to learn to do this so I could take advantage of the ultrasonic cleaners that my range offers. I...
1-13 of 13 Results
Top